Tag Archives: Safety

Learn About Radio Remote Controls and Boom Truck Safety

In the any industry that requires the use of heavy industrial equipment, safety is paramount. Every day work crews risk injury when handling these machines, so every effort should be made to keep work sites as safe as possible. Through safety courses, various certifications, ANSI and OSHA requirements, and better-developed equipment, manufacturers and the industries using such machinery strive to provide safer working conditions for workers. This is further supported by the development of new technology in radio remote controls for the operation of a boom and crane.

Operation

Boom trucks have been operated in a number of different ways ever since being developed. Control usually is from either inside the vehicle or from external controls on the chassis. Both of these arrangements can leave operators exposed to certain risks, such as a malfunctioning boom, the dropping of heavy items, unbalanced vehicles that tip over, or even accidental electrocution. It is an unfortunate part of the job, sometimes simply unavoidable when working with machinery that handles such large loads.

Benefits

With all risk factors in mind, boom truck technology has advanced to remote radio-controlled operation. Such distant control greatly increases job site safety by removing operators and all other workers from the immediate operating area of these machines. In case of an accident such as dropping a load, tipping over, or a boom malfunction, the worst damage should be the loss of the equipment or the load being lifted while human lives are protected. Remote control offers the ability to operate multiple ton units with precision, without the associated risks that have caused serious injuries and even deaths in the past.

Problems

Unfortunately, the remote operation of such heavy machinery is not foolproof, having had its share of problems. Depending on the device that is used, its radio frequency and the job site location can cause interference between the operator and the device which is a notable concern and an additional safety issue.

Improvements

There has been some advancement in the use of military-developed, spread-spectrum radio frequencies and remote devices designed to alleviate such problems. Radio signals from these devices move faster than other types of radio frequencies, which makes the other types unable to interfere with this device’s signal. With a higher safety record and more proven effectiveness in preventing radio interference, equipment manufacturers are beginning to look toward the exclusive use of such technology. The biggest concern is that these types of radio remote controls will greatly increase vehicle production costs due to the inclusion of such a high-tech component. There is some controversy over whether or not larger manufacturers will regularly use this newer, more sophisticated radio technology making such units more expensive.

As remote controls on boom trucks become a more standard feature, many of the larger vehicle manufacturers are in favor of this newer, more advanced technology as the best way to ensure work crew safety. There is still much discussion to occur about both the pros and cons of standardizing a more expensive remote control technology and how to bring the cost down without sacrificing safety. Yes, protection from harm can occur with boom truck remote radio-controlled handling and be beneficial – so long as the cost doesn’t significantly increase as well!

Industrial Safety Products – Keeping Your Facility, Equipment, and Your Employees Safe

What does it take to keep a facility safe? Industrial safety products include a huge array of safety products, from spill containment products to spill clean up products and many more.

However, since spill management products are members of such huge categories of their own, let’s focus on the kinds of safety products that protect from other mishaps, including bumps, scrapes, and other damage caused by collisions and similar incidents.

And preventing or ameliorating those kinds of damage requires a whole different category of products, many of them involving padding or creating some kind of barrier to keep equipment and physical structures safe. Of course, some of them can protect people as well.

Here are some of the main types of industrial safety products:

1) Bollards and posts

Bollards and posts are great for protecting equipment, physical structures, and even people from heavy equipment — and even regular vehicles.

In fact, bollards are among the products that have crossed over into non-industrial settings as well. And as you’d expect, entire lines of bollards have appeared that are designed to look attractive while still doing a great job of keeping machinery or cars away from sensitive areas.

2) Machine guards

Machine guards are a distant relative to bollards — they’re designed specifically to keep machines safe. Their shape is a bit different, but the idea is the same: keep heavy machinery and other equipment away from machines.

3) Bollard covers

While bollards are sturdy, they can take a lot of abuse. And in order to prevent too many scrapes and dents, you can get bollard covers and keep them looking good for years to come. In fact, once the bollard covers look a little ratty, you can simply replace them with new ones. Installation is a breeze since you simply pull the covers over the bollards.

4) Wall and Corner Protectors

The padding principle is also used in the case of wall and corner protectors. Vehicles and heavy machinery frequently bump onto walls and corners, and repairing those can get expensive.

Fortunately, wall and corner protectors provide a simple solution to that problem. Simply install them along critical areas, and they act like bumpers at bumper cars. Instead of the wall getting damaged, the wall or corner protectors get a scrape. Then again, they’re designed to take quite a beating, so they’ll look good for a long time before they have to be replaced.

The Benefits Of Using Food Industrial Products That Improve Safety And Efficiency

Every worksite needs to be clean and orderly in order to function safely and productively. Sanitation is especially important in the food product manufacturing industry. Federal laws and standards are explicit and stringent in mandating how food products are manufactured with specifications on industrial equipment and industrial supplies used in this industry. When it comes to producing foodstuffs, any contamination from bacteria or even dirt can cause health problems for end consumers.

In order to meet sanitation requirements while also maintaining a safe and effective workplace, there are a wide variety of industrial supplies designed to be utilized in this setting. Food compatible industrial equipment is designed to handle products safely while promoting a sanitary environment. In the end, utilizing the right products empowers companies to excel.

Materials Used In Food Grade Industrial Equipment

Typically, manufacturers in this field utilize a common set of materials for process machinery. Sanitation properties are essential when designing production lines in addition to typical design concerns. For exposed surfaces on working machinery, smooth and polished materials are utilized. This type of surface is easier to clean and does not promote the growth of bacteria like a rough surface would. The most common way to achieve this specification is with the use of polished stainless steel.

However, stainless steel can be cost prohibitive for certain pieces of machinery. Polymer and plastic blends can also be utilized as long as they are smooth and polished. Another option incorporates standard carbon steel with a zinc or chrome plating to keep costs low while maintaining a smooth surface. Anti-microbial coatings and even Teflon can be applied for additional prevention of contamination.

These materials are in common use for the food industry for another reason. While corrosion is a problem in any industry, when handling food items, rust presents additional problems. Metal contamination will cause food to take on an unpleasant taste, odor, or color as well as putting toxic materials into finished products. A strong corrosion resistance is also necessary in order to withstand alkaline washing solutions and acidic ingredients.

To make matters more complicated, industry equipment used in this field may also be used in high or low temperature production steps. High temperature baking, cooking, or frying as well as low temperature freezing and preserving process steps create significant temperature swings. Industrial supplies have to be selected that will perform at low and high temperatures in addition to room temperature.

Essential Industrial Supplies: Food Grade Lubricants

Every moving part on a machine requires lubrication, but conventional oils and greases are incompatible with food products. If these lubricants contact goods on the production line, the resulting products will be off color, off taste, and toxic when consumed. Of course, lubricants are still required for process machinery, so food grade materials have been designed to keep industrial equipment running without contaminating products from incidental exposure.

These lubrication solutions are made to be odorless, colorless, tasteless, and non-toxic. They are rated for incidental contact with foodstuffs without causing harmful side effects for consumers. While vegetable oil was used for lubrication in past years, today’s specially blended products are tested and approved as safe for use.

These types of industrial supplies come in a wide variety of different products for nearly any lubrication application. Silicone lube and belt dressings are available in food-safe varieties. Machine bearings can be greased with these products as well. There are even automatic feeders that can be attached to a grease fitting and provide a steady stream of lube, helping to reduce the amount of time maintenance personnel have to spend on that machine. Other varieties include anti-seize, pneumatic lube, and anti-wear to low temperature and high temperature oils and greases. This list also includes heat transfer fluids and coolants that are rated for incidental contact with products, in addition to hydraulic fluids and gear lube.

Worker Safety And Productivity

Personal protective equipment and industrial supplies for workers also play an important role in safe and productive work environments. Standard personal protective equipment that is supplemented with additional sanitation equipment is ideal for workers in this field. For example, hair nets, latex gloves, and face masks help keep workers safe and prevent contamination with the items with which they are working.

At the end of the day, every facility is responsible for following the best practices and standards in order to produce a safe product. With the wide range of tools available, every business can meet this goal.